From The Mana World
Line 1: Line 1:
[[category:reference]]
[[category:reference]]
Last updated By DJDrift2222
==The Setup==
==The Setup==
This article describes how to set up eAthena on a Windows system. There is also an article about [[setting up eAthena on Linux]].
This article describes how to set up eAthena on a Windows system. There is also an article about [[setting up eAthena on Linux]].

Revision as of 19:58, 3 March 2012

Last updated By DJDrift2222

The Setup

This article describes how to set up eAthena on a Windows system. There is also an article about setting up eAthena on Linux.

  1. Download Cygwin from http://www.cygwin.com/
  2. Find something to keep you busy, because the next step will take a while
  3. Install Cygwin. Select "install from Internet" as download source. When you are on the component select screen make sure the component category "devel" is installed. You technically need not everything from this group but a lot. So just install the whole group.
  4. Start Cygwin
  5. Enter ln -s flex /usr/bin/lex This is to get the Flex commands ready for use they are not active at first...
  6. Browse to the directory where you would like to have eAthena. When you want it in c:/tmw, for example, the command would be cd /cygdrive/c/tmw/ (directory must exist. when it does not you can create it with mkdir /cygdrive/c/tmw/)
  7. Enter git clone git://gitorious.org/tmw-eathena/mainline.git eathena to download the most recent sourcecode of the server.

What you should have so far

  1. Enter git clone --recursive git://github.com/themanaworld/tmwa-server-data.git eathena-data to download the most recent game content for the server.

Image for this step

  1. Enter cd eathena to browse into the newly created eathena directory
  2. Enter make to compile the sourcecode.

Step 1 of Make Step 2 of Make Step 3 of Make Step 4 of Make Step 5 of Make

  1. Enter cp login-server char-server map-server ladmin /usr/local/bin/
  2. Enter git config --global url.git@gitorious.org:.pushInsteadOf git://gitorious.org
  3. Enter cd ../eathena-data
  4. Enter ln -s ../../git/hooks/post-merge .git/hooks/
  5. Enter ln -s ../../../git/hooks/post-merge client-data/.git/hooks/

Up to this point

  1. Enter make conf
  2. Enter cd client-data

what you should have up to this point

  1. Enter git checkout master
  2. Enter cd music
  3. Enter git checkout master

Last Image for these Steps

  1. Copy cygwin1.dll and cygz.dll into the eathena directory. You find them in the subdirectory /bin of your cygwin installation.

Testing your server

Now you can close that terminal and open a new one

  1. Open a terminal
  2. Enter cd ~/tmw-ea/eathena-data/
  3. Enter ./char-server& ./login-server& ./map-server&

When one of them closes immediately after you start it you should try to start it from the command prompt to see the error messages before the window closes.

You should now be able to connect to your server by starting your TMW client and entering "127.0.0.1" as server. Before you announce your server publically for others to play on you should change the server account passwords in accounts.txt, conf/char_local.conf and conf/map_local.conf to avoid abuse. Register a new character through your client to confirm if everything is working properly.